The Seraphin® Series C Slicker Plate Prover is manufactured of type 300 stainless steel. It is available in any capacity from 5 liters (1 US Gallon) to 379 liters (100 US Gallons). Typical sizes are listed in the specification sheet, however custom capacities are available.

Seraphin® no longer manufactures terneplate or carbon steel measures. Our Series C Slicker Standards are typically used in a metrology laboratory environment to measure the accuracy and to set the zero mark on test measures and provers.

To have a better idea of the use of a Slicker Prover please watch the video below provided by

The National Institute of Standards and Technology

?


Unit of Measure
Items
slicker

1 Gallon Seraphin® Series C Slicker Plate Prover

Image

3 Gallon Seraphin® Series C Slicker Plate Prover

Image

5 Gallon Seraphin® Series C Slicker Plate Prover

Image

10 Gallon Seraphin® Series C Slicker Plate Prover

Image

25 Gallon Seraphin® Series C Slicker Plate Prover
Prover Capacity N/A 1 gal N/A 3 gal N/A 5 gal N/A 10 gal N/A 25 gal
Diameter N/A 9 in N/A 9 in N/A 9 in N/A 14 in N/A 24 in
Height N/A 13 in N/A 20 in N/A 28 in N/A 26 in N/A 20 in
Drain N/A 0.5 in N/A 0.5 in N/A 0.5 in N/A 1.5 in N/A 1.5 in
Material N/A 300 Stainless Steel
Standards N/A NVLAP Laboratory Traceable to National Institute of Standards and Technology
Note N/A Standard Material 300 Series, Stainless steel Brushed finish. Standard Sizes Shown, Custom Sizes on Request
Laboratory Measures N/A These Seraphin Laboratory Measures are the highest quality Master Measures produced anywhere. The outstanding features of Series C, in addition to slicker plates are as follows.
  • An overflow trough provided to entrap any Liquid that may overflow when filling.
  • Baffle is close to drain to eliminate a vortex.
  • Stainless Steel valve may be repaired without removing it from measure and without change of accuracy
  • Three adjustable legs are provided for leveling the measure.
  • Top of Rim is machined perpendicular to axis.
Features N/A
  • Manufactured of Series 300 Stainless Steel
  • Calibration By Certified NVLAP Laboratory Traceable to National Institute of Standards and Technology
  • Each unit is equipped with a three piece stainless steel ball valve
  • Machined neck perpendicular to axis so that excess liquid can be sheared off by sliding a plate across the top of the neck
  • The "slicker-plate" standard has no scale but has a volume equal to the nominal capacity of the unit.
  • Solid flared legs with adjustable feet for leveling.
  • Each unit has a 5" glass circle "slicker plate".